Kidde i12010SCO carbon monoxide & smoke detector, 120V 10-year worry-free AC/DC sealed lithium wire-In with battery back-up
Kidde model i12010SCO 120v carbon monoxide and smoke detector come with a 10 year worry-free sealed lithium battery for backup. The smoke and carbon alarm will verbally let you know if there is a "fire" or "carbon monoxide" threat. This smoke and carbon detector can interconnect with 24 Kidde devices. This smoke detector has ionization sensor technology. This Kidde carbon monoxide and the smoke alarm have all the necessities needed to keep you safe in an event of a fire or carbon monoxide leak.
Sealed-In Lithium Battery Backup - no battery replacement required over the 10-year life of the alarm. Eliminates worry about removal or unauthorized deactivation of alarm.
Voice Warning System - Verbally announces “FIRE!” or “WARNING! CARBON MONOXIDE” to help distinguish between threats.
Smart Interconnect - Interconnects up to 24 Kidde devices (of which 18 can be initiated)
Hush Feature - Temporarily silences nuisance alarms for approximately 9 minutes and will not allow hush mode unless the unit is in alarm mode.
Peak Level Memory - Announces “CARBON MONOXIDE PREVIOUSLY DETECTED” if the alarm has detected a CO level of 100ppm or higher since it was the last reset.
Ionization Sensing Technology - Ideal for detecting fast flaming and other types of fires.
Green LED - Illuminates to indicate the unit is receiving AC power. Flashes once every 60 seconds to indicate battery-only mode. Flashes once per second during alarm to indicate initiating alarm. Flashes once every 16 seconds to indicate smoke or CO previously detected. Flashes every 2 seconds while the alarm is in HUSH mode.
Red LED - When a dangerous level of smoke or carbon monoxide has been detected the red LED will flash. If the unit malfunctions, the red LED will flash and the unit will chirp every 30 seconds.
- Model: i12010SCO
- Power Source: 120VAC, 60Hz 45mA max per alarm sealed lithium battery backup
- Smoke Sensor: Ionization
- CO Sensor: Electrochemical
- Audio Alarm: 85dB at 10ft
- Temperature Range:40˚F (4.4˚C) to 100˚F (37.8˚C)
- Humidity Range: 10%-85% non-condensing relative humidity (RH)
- Size: 5.5” in diameter x 1.75” depth
- Weight: 1 lb.
- Wiring: Quick connect the plug with 6” pigtails
- Interconnects: Up to 24 Kidde devices (of which 18 can be initiated)
- Warranty: 10 years limited